Honda BF25 Outboard Engines

Technical Specifications

MOTOR
Type	4-Stroke SOHC 3 Cylinders/6 Valves
Displacement	552 cc (33.7 cubic inches)
Bore & Stroke	61 mm x 63 mm (2.4 x 2.5 inches)
Full Throttle RPM Range	5,000-6,000 RPM
Rated Power	25 HP @ 5,500 RPM
Cooling System	Water Cooled
Fuel Delivery	3 Carburetors
Ignition System	Capacitor Discharge(CDI)
Starting System	Electric/Recoil
Exhaust	Through Prop

DRIVE
Gear Ratio	2.08:1
Gear Shift	F-N-R

EQUIPMENT
Alternator	10 Amp (126 watt)
Propeller Type	3-Blade Aluminum
Diameter x Pitch
(S-type)	9-1/4 x 12 inches
(L-type)	9-1/4 x 12 inches
Power Trim & Tilt	LRTC model
Gas-Assisted Tilt	SGC,SHGC,LGC & LHGC models
Oil Pressure Alert	Standard
Temperature Alert	Standard
Rev-Limiter	Standard
Speedometer Pickup

DIMENSIONS
Overall Width	375 mm /14.8 inches
Recommended Transom Height
(S-type)	381 mm/15 inches
(L-type)	507 mm/20 inches
Dry Weight (S-type)	70.5 kg/155 lbs.
Dry Weight (L-type)	72.5 kg/1lbs.

All Honda outboards are power rated with N.M.M.A. procedures. Specifications are subject to changes without prior notice.

Features

Four Stroke Engine Design

World-renowned Honda quality combines proven reliability and superior fuel efficiency, with no oil mixing.

Forward Mounted Shift Lever (Tiller Models)

Allows for easier shifting, especially when docking or in tight access areas.

Over-Rev Protection

Standard rev-limiter protects the engine from severe damage due to over-revving.

Over-Rev and Over Heat Warning Systems

Standard over heat and low oil warning systems offer peace of mind and protect your investment.

Fresh Water Flush Port

Allows easy hook-up to fresh water supply tp flush debris and salt water out of the engine extending the life of the outboard.

Regulated High Output Charging System

A 6 amp charging system is standard on manual start models and a 10 amp on the electric start models. Each system is equipped with a solid state regulator/rectifier for easy hook-up.

Emergency Stop Switch/Safety Lanyard

The boat operator clips the lanyard to his or her wrist which will activate the safety stop switch if the operator leaves the helm.

Shallow Water Drive

Allows the engine to run in a tilted position at low throttle settings - greatly reducing the risk of engine damage while navigating in shallow waters.

Sacrificial Anodes

The BF25s have one internal and two external sacrificial anodes protect metal components from corrosion.

Standard Fuel Tank, Hose and Propeller

A 5 gallon fuel tank, hose and aluminum proller are included as standard equipment.

Three Year Warranty

The best outboards in the industry are backed by the best warranty in the business, 3-years parts & labour!